Place your order now for a similar assignment and have exceptional work written by our team of experts, At affordable rates
For This or a Similar Paper Click To Order Now
ASSIGNMENT INSTRUCTIONS
Scope
Based on ISO 14001 answer the following question concerning a fabrication workshop where
the management is preparing for ISO 14001 certification. In the fabrication process, manual
arc welding is performed which may create noise issues when the welding slag is removed
manually by hammering. Non-destructive testing, including using an X-ray process to carry out an inspection to check for the quality of the welds, is carried out by a contractor during the
evening when there is a minimal number of workers working in the workshop. The X-ray
process involves the use of a radioactive source.
Before shipment, the finished items are put in pallets, and fumigation is carried out on-site by
contractors in the evening to minimize the number of workers who may be exposed to the
fumigation process. The chemical used for fumigation is highly toxic and a permit from the
relevant authority must be obtained for its use.
HOW TO WORK ON THIS ASSIGNMENT (EXAMPLE DRAFT/ESSAY)
The scope of ISO 14001 certification for the fabrication workshop will cover the organization’s environmental management system (EMS) and its impact on the environment. The EMS will include policies, procedures, and processes that are designed to reduce the organization’s environmental impact, including noise, radiation, and chemical exposure.
The manual arc welding process used in the fabrication workshop may create noise issues, particularly when welding slag is removed manually by hammering. The EMS should include measures to reduce noise levels, such as using noise-reducing equipment or scheduling noisy activities during times when there are fewer workers in the workshop.
Non-destructive testing using X-ray involves the use of a radioactive source and can be hazardous to workers’ health. The EMS should include measures to ensure the safety of workers, including using appropriate personal protective equipment and scheduling X-ray inspections during times when there are fewer workers in the workshop.
The fumigation process used for finished items is carried out by contractors in the evening to minimize workers’ exposure to the highly toxic chemical used. The EMS should include measures to ensure that the fumigation process is carried out safely and that workers are protected from exposure to the toxic chemical. The organization should obtain a permit from the relevant authority before using the chemical for fumigation.
In conclusion, ISO 14001 certification for the fabrication workshop will cover the organization’s EMS and its impact on the environment. The EMS should include measures to address noise, radiation, and chemical exposure, among other environmental issues, to ensure the safety of workers and minimize the organization’s impact on the environment.
For This or a Similar Paper Click To Order Now
